KISS-101

12" x 12" PCB Batch Load

The KISS-101 is used to solder through hole components on SMT boards within close proximity of adjacent components, featuring the “Super fast” robotic motion to maximize production. This process overcomes the limitations of operator dependent soldering with a truly flexible automated molten solder delivery system. The KISS-101 couples high throughput with precise process controls. The programmable features provide the tools to set all process parameters, including flux deposition, immersion depths, pre-heat dwells, travel distances and speeds, and solder temperature. Once set, the system will repeat precisely.

Lead Solder Pot-Pump Assy
Heated N²
Programming Camera
KISS Board Warp Compensation System
Solder Alloy Verification
Spray Fluxer
Fiducial Correction System
Included Solder Nozzles
Topside Preheater
Precision Drop-Jet Fluxer
Dropjet Verification System
Wave Nozzle Pump
Bullet Nozzle Set
KISS Pump Maintenance Kit
Dual Monitors
Witness Camera
2ⁿᵈ Witness Camera
Lead-free Alloy Solder Pot & Pump
HMP Alloy Solder Pot & Pump
6 Channel Data Logger
Universal PCB Location Rack
Closed Loop Rotary Encoders
SWAK-OS Offline Programming
Installation and Training*
Skyhook Fixture
Overall Dimensions: 54" x 40" x 45" (1371mm x 1016mm x 1143mm)
Weight of System: 650 Lbs.
Power: 120VAC/1PH/60Hz 15amps
Preheater Power: 208/220-240VAC/1PH/60Hz 15amps
Air Requirements: Min. 90 PSI • Max. 100 PSI
N² Requirements: 99.999% Pure @ Min. 60 PSI Max. 100 PSI
N² Consumption: 30-50 CFH
Max Work Area: 12" x 12" (300mm x 300mm)
PCB Thickness: Not Limited with proper support
Rail Width Adjust: Manual Adjust

Complete Datasheet: View/Download

Additional Equipment

N² Generators

ACE Production Technologies has partnered with Parker to produce the KNG Family of Nitrogen Generators to complement the KISS Selective Soldering systems. These generators are tailored to ACE’s specifications to provide adjustable purity and flow specific to your process. The generators work on the principle of compressed air passing through a series of molecular sieves. The nitrogen molecules are harvested while the O² and other gasses pass through. This process is completely automated requiring only compressed air.

The generators are turnkey requiring only 115VAC and compressed shop air. The controls are all solid state with a color touch screen interface. A digital oxygen meter (included) displays the PPM of oxygen so you can be assured of ab-solute purity.

The KNG generators are available in varying sizes to match the demands of single and multiple KISS machines. They provide continuous high quality nitrogen that is less expensive than cylinder service.