Cerno™ 105IL

36" x 28" PCB In-Line

The Cerno™ 105IL is a larger version of our Cerno™ 105IL fully configured In-Line Selective Soldering Machine designed to handle the board size and weight of backplanes and other oversized product, featuring the “Super fast” robotic motion to maximize production. The PCB is processed in a 1” (25mm) border frame which supports, locates and flattens the PCB and transports the PCB through the Cerno™ 105IL process. Like all KISS machines the PCB is kept stationary during the process preventing components from toppling over causing “unset” inter-metallic fillets. The Cerno™ 105IL couples high throughput with precise process controls. The programmable features provide the tools to set all process parameters, including immersion depths, pre-heat dwells, travel distances and speeds, solder temperature and wave height. With the top side pre-heater class 3 solder joints can be achieved on PCB thickness up to 9mm.

Lead Solder Pot-Pump Assy
Heated N²
Programming Camera
KISS Board Warp Compensation System
Solder Level Check
Wave Height Verification
Dual Monitors
Solder Alloy Verification
SWAK-OS Offline Programming
Spray Fluxer
Witness Camera
2ⁿᵈ Witness Camera
Closed Loop Rotary Encoders
Fiducial Correction System
Solder Nozzle Set
Installation and Training*
Topside Preheater
Precision Drop-Jet Fluxer
Dropjet Verification System
Wave Nozzle Pump
Dual Solder Nozzle Pumps
Solder Pot Service Cart
KISS Pump Maintenance Kit
Lead-free Alloy Solder Pot & Pump
HMP Alloy Solder Pot & Pump
6 Channel Data Logger
Bottom Side Pre-heat
Overall Dimensions: 78" x 69" x 54" (1981mm x 1752mm x 1371mm)
Weight of System: 1250 Lbs.
Power: 120VAC/1PH/60Hz 15amps
Preheater Power: 208/220-240VAC/1PH/60Hz 15amps
Air Requirements: Min. 90 PSI • Max. 100 PSI
N² Requirements: 99.999% Pure @ Min. 60 PSI Max. 100 PSI
N² Consumption: 30-60 CFH
Max Work Area: 36" x 28" (900mm x 711mm)
PCB Thickness: 3mm - 12mm
Rail Width Adjust: Programmable

Complete Datasheet: View/Download

Cerno™ 105IL

Additional Equipment

N² Generators

ACE Production Technologies has partnered with Parker to produce the KNG Family of Nitrogen Generators to complement the KISS Selective Soldering systems. These generators are tailored to ACE’s specifications to provide adjustable purity and flow specific to your process. The generators work on the principle of compressed air passing through a series of molecular sieves. The nitrogen molecules are harvested while the O² and other gasses pass through. This process is completely automated requiring only compressed air.

The generators are turnkey requiring only 115VAC and compressed shop air. The controls are all solid state with a color touch screen interface. A digital oxygen meter (included) displays the PPM of oxygen so you can be assured of ab-solute purity.

The KNG generators are available in varying sizes to match the demands of single and multiple KISS machines. They provide continuous high quality nitrogen that is less expensive than cylinder service.

Load & Un-load Conveyors

Using conveyors to load and un-load PCB's dramatically speeds up processing.

View Complete Datasheet